Jumat, 20 Juli 2018

Setting Firewall Mikortik dari serangan DDOS attack protection

In general

DoS (Denial of Service) attack can cause overloading of a router. Which means that the CPU usage goes to 100% and router can become unreachable with timeouts. All operations on packets which can take significant CPU power like firewalling (filter, NAT, mangle), logging, queues can cause overloading if too many packets per second arrives at the router.
Generally there is no perfect solution to protect against DoS attacks. Every service can become overloaded by too many requests. But there are some methods for minimising the impact of an attack.
  • Get a more powerful router or server
  • Get a more faster uplink
  • Reduce the number of firewall rules, queues and other packet handling actions
  • Track attack path and block it closer to source (by upstream provider)


TCP SYN flood

More info: SYN flood.


  • Are there too many connections with syn-sent state present?
/ip firewall connection print
  • Are there too many packets per second going through any interface?
/interface monitor-traffic ether3
  • Is CPU usage 100%?
/system resource monitor
  • Are there too many suspicious connections?
/tool torch


  • Limit incoming connections
An IP address with too many connections can be added to a 'black-list' type address list for further blocking.
/ip firewall filter add chain=input protocol=tcp connection-limit=LIMIT,32  \
action=add-src-to-address-list  address-list=blocked-addr address-list-timeout=1d 
where LIMIT is the max. number of connection per IP. LIMIT should be a value of 100 or even higher as many services use multiple connection (HTTP, Torrent, other P2P programs).
  • Action tarpit
Instead of simply dropping attacker's packets (with 'action=drop') router can capture and hold connections and with a powerful enough router it can slow the attacker down.
/ip firewall filter add chain=input protocol=tcp src-address-list=blocked-addr \
connection-limit=3,32 action=tarpit 
  • SYN filtering
Some advanced filtering can by applied to tcp packet state.
/ip firewall filter add chain=forward protocol=tcp tcp-flags=syn connection-state=new \
action=jump jump-target=SYN-Protect comment="SYN Flood protect" disabled=yes
/ip firewall filter add chain=SYN-Protect protocol=tcp tcp-flags=syn limit=400,5 connection-state=new \
action=accept comment="" disabled=no
/ip firewall filter add chain=SYN-Protect protocol=tcp tcp-flags=syn connection-state=new \
action=drop comment="" disabled=no
'syn limit=400' is a threshold, just enable rule in forward chain for syn packets to get dropped (for excessive amount of new connections)
  • SYN cookies
More info: SYN cookies
For v6.x:
/ip settings set tcp-syncookies=yes
For older RouterOS versions:
/ip firewall connection tracking set tcp-syncookie=yes

Tidak ada komentar:

Posting Komentar